|










| |
|
Below are samples of some of
the drawings
that will be provided to you with your
Lightning Protection Kit.
|
|
LIGHTNING
INSTALLATION DRAWINGS
This drawing is the property of LIGHTNING and
applies only to the building
for which it was expressly designed. Individual installation designs
will be
required for other buildings. All drawings, designs and other
installation
information are for use only with approved materials supplied by LIGHTNING.
|
Customer Name
Address |
|
PAGE #1 OVERALL VIEW

NOTE: Consult page #
shown for detailed sketches.
LIGHTNING
P.O. Box 600, Howes Cave, NY
12092
(888) 256-2073 |
|
The
numbers shown on the above drawing refer to additional sketches
which provide detailed information on each phase of the installation.
The
sketch below is an example of these detailed drawings.
|
|
LIGHTNING
INSTALLATION DRAWINGS
This drawing is the property of LIGHTNING and
applies only to the building
for which it was expressly designed. Individual installation designs will
be
required for other buildings. All drawings, designs and other installation
information are for use only with approved materials supplied by LIGHTNING.
|
Customer Name
Address |
|
PAGE #2 GROUNDING SKETCH

NOTE: Copper cable must be
buried minimum of one foot below ground level and extend
minimum to
two feet from building. Ground rod must be driven full 10' depth.
All
connections
must be secure
LIGHTNING-SAFE 8810
Tradeway St., San Antonio, TX 78217
(210) 832-9500 |
|